Difference between revisions of "Chloe 280SE"

From Sinclair Wiki
Jump to navigation Jump to search
m (Use proper multiply symbols)
 
Line 14: Line 14:
 
}}
 
}}
  
The Chloe 280SE is a reference specification for a production version of the [[ZX Spectrum SE]]. It has the following differences:
+
The Chloe 280SE was originally a reference specification for a production version of the [[ZX Spectrum SE]]. It had the following differences:
  
 
* T-states are exactly as per the 48K Spectrum.
 
* T-states are exactly as per the 48K Spectrum.
Line 25: Line 25:
 
* Z84C0020PEG CPU (software switchable between 3.5Mhz and 21Mhz).
 
* Z84C0020PEG CPU (software switchable between 3.5Mhz and 21Mhz).
 
* YM219F PSG (software switchable stereo panning).
 
* YM219F PSG (software switchable stereo panning).
 +
 +
It subsequently became an FPGA project not directly related to the ZX Spectrum.

Latest revision as of 09:29, 23 August 2018

Infobox: Chloe 280SE
Manufacturer Specification only
Mfg. volume None
CPU Z804C0020 @ 3.5MHz / 21MHz
ROM 32kB
RAM 256kB
as pages 64kB + 64kB + 128kB
Gfx Res 256×192 or 512×192 (hi-res)
Gfx Colours 256 (2 per 8×8 or 8×1 cell), or 2 (hi-res)


The Chloe 280SE was originally a reference specification for a production version of the ZX Spectrum SE. It had the following differences:

  • T-states are exactly as per the 48K Spectrum.
  • 256K total RAM (no page 8 in the HOME bank, and no 8K serial RAM on the PSG)
  • 224K of uncontended RAM (64K in each sideways bank, 96K in the HOME bank)
  • 32K of contended VRAM (page 5 and 7 in the HOME bank)
  • No RAM contention when paging sideways RAM over the HOME bank.
  • 32K Flash ROM (no TR-DOS traps, SE Basic IV is the default firmware).
  • ULAplus support in all video modes.
  • Z84C0020PEG CPU (software switchable between 3.5Mhz and 21Mhz).
  • YM219F PSG (software switchable stereo panning).

It subsequently became an FPGA project not directly related to the ZX Spectrum.