ZX Spectrum 16K/48K edge connector: Difference between revisions

Jump to navigation Jump to search
no edit summary
No edit summary
Line 9: Line 9:
|A12||2||2||A13
|A12||2||2||A13
|-
|-
| +5v||3||3||D7
|[[#Power|+5v]]||3||3||D7
|-
|-
| +9v||4||4||NC
|[[#Power|+9v]]||4||4||NC
|-
|-
|[[#Key_Slot|SLOT]]||5||5||[[#Key_Slot|SLOT]]
|[[#Key_Slot|SLOT]]||5||5||[[#Key_Slot|SLOT]]
Line 43: Line 43:
|!BUSRQ||19||19||!WR
|!BUSRQ||19||19||!WR
|-
|-
|!RESET||20||20|| -5v
|!RESET||20||20||[[#Power|-5v]]
|-
|-
|A7||21||21||!WAIT
|A7||21||21||!WAIT
|-
|-
|A6||22||22|| +12v
|A6||22||22||[[#Power|+12v]]
|-
|-
|A5||23||23|| -12v
|A5||23||23||[[#Power|12v AC]]
|-
|-
|A4||24||24||!M1
|A4||24||24||!M1
Line 72: Line 72:
====Key Slot====
====Key Slot====
The key slot ensures correct alignment of a peripheral with the edge connector. The slot occupies the pin 5 positions
The key slot ensures correct alignment of a peripheral with the edge connector. The slot occupies the pin 5 positions
====Power====
* Lower Pin 4 is connected to the +9 volt (nominal) DC supply from the ZX Spectrum PSU.
* Lower Pin 3 is connected to the smoothed +5 volt DC output of the internal 7805 regulator.
* Upper Pin 20 is connected to the -5 volt DC output of the internal power supply circuitry.
* Upper Pin 22 is connected to the +12 volt DC output of the internal power supply circuitry.
* Upper Pin 23 is connected to the oscillating voltage within the internal power supply circuitry. This is nominally 12 volts AC.
* Lower Pins 6, 7, and 14 are connected to the 0 volt rail.


====Video Outputs====
====Video Outputs====
Pin 15 on the lower side of the edge connector provides the same composite video signal that is fed into the UHF modulator.
Pin 15 on the lower side of the edge connector provides the same composite video signal that is fed into the UHF modulator.
Lower pin 16 on the carries an inverted luminosity signal to use with the 'U' and 'V' colour difference signals provided on lower pins 18 and 17 respectively
Lower pin 16 on the carries an inverted luminosity signal to use with the 'U' and 'V' colour difference signals provided on lower pins 18 and 17 respectively

Navigation menu